Official Samsung Galaxy J8 SM-J810F DS Stock Rom
The Samsung Galaxy J8 is a mid-range smartphone that was launched in 2018. It features a 6-inch Super AMOLED display, a Snapdragon 450 processor, 4 GB of RAM, 64 GB of internal storage, a dual rear camera setup, a 16 MP front camera, and a 3500 mAh battery. The device runs on Android 8.0 Oreo out of the box, and has received several updates since then.
If you want to install the official stock firmware on your Samsung Galaxy J8 SM-J810F DS, you can download it from the links below. The stock firmware can help you restore your device to its original state, fix any software issues, or upgrade to the latest Android version. Before you proceed, make sure you have backed up your data and have a compatible USB cable and driver installed on your computer.
How to download the official stock firmware for Samsung Galaxy J8 SM-J810F DS
There are two sources where you can download the official stock firmware for your Samsung Galaxy J8 SM-J810F DS: SamMobile and FirmwareX.Net. Both websites offer free and premium options for downloading the firmware files. The premium option allows you to download faster and without ads, while the free option may have some limitations and delays.
To download the firmware from SamMobile, you need to create an account and log in. Then, you can search for your device model (SM-J810F) and select the region and carrier that matches your device. You will see a list of available firmware versions with their details, such as date, PDA, CSC, and Android version. You can choose the latest or any previous version that you want to download. Click on the download button and follow the instructions on the screen.
To download the firmware from FirmwareX.Net, you do not need to create an account or log in. You can simply search for your device model (SM-J810F) and select the firmware version that you want to download. You will see a link to download the firmware file from either AFH or Mshare servers. Click on the link and wait for the download to start.
How to install the official stock firmware on Samsung Galaxy J8 SM-J810F DS
After you have downloaded the firmware file, you need to extract it using a tool like WinRAR or 7-Zip. You will get four files: AP, BL, CP, and CSC. These files contain the system image, bootloader, modem, and carrier settings of your device.
To install the firmware on your device, you need to use a tool called Odin, which is a Windows-based software that allows you to flash firmware files on Samsung devices. You can download Odin from various sources online, such as [this one]. Make sure you download the latest version of Odin that supports your device.
Before you start flashing, you need to put your device in download mode. To do this, turn off your device and press and hold the Volume Down + Home + Power buttons simultaneously for a few seconds. You will see a warning screen asking you to confirm if you want to enter download mode. Press Volume Up to continue.
Once your device is in download mode, connect it to your computer using a USB cable. Launch Odin and wait for it to recognize your device. You will see an ID:COM port number in blue and a message saying "Added!" in the log window.
In Odin, click on the AP button and browse for the AP file that you extracted from the firmware file. Do the same for BL, CP, and CSC buttons. Make sure you select the correct CSC file according to your region and carrier. For example, if your device is from Morocco (MWD), select the CSC_MWD file.
In Odin, make sure that only Auto Reboot and F. Reset Time options are checked in the options tab. Do not check any other options or change any settings.
When everything is ready, click on the Start button in Odin and wait for the flashing process to complete. It may take several minutes depending on the size of the firmware file and your computer speed. Do not disconnect your device or close Odin during this process.
When the flashing is done, you will see a green PASS! message in Odin and your device will reboot automatically. You can disconnect your device from the computer and wait for it to boot up. You may see a message saying "Installing system update" or "Optimizing apps" on the screen. This is normal and may take some time.
Congratulations, you have successfully installed the official stock firmware on your Samsung Galaxy J8 SM-J810F DS. You can now enjoy the latest features and security updates on your device.
If you encounter any problems or have any questions, feel free to leave a comment below or contact us through our website. We will try to help you as soon as possible.